Keep your CPU frosty with the dual-fan NH-D15 Dual-Tower CPU Cooler from Noctua. Featuring a nickel-plated heatsink and pipes, this dual-tower cooler also sports aluminum radiators and two NF-A15 PWM cooling fans. Providing speeds of 300 to 1500 rpm at a max noise level of 24.6 dBA, the PWM fans can be controlled directly from the motherboard. And, thanks to the included low noise adapters, users can also cap the speed of the fans at 1200 rpm, while also dropping operational noise to 19.2 dBA. A Y cable is also present, allowing you to run both fans from a single motherboard connection. The Noctua NH-D15 Dual-Tower CPU Cooler is compatible with Intel LGA 1150, 1151, 1155, 1156, 1200, square-ILM 2011 and 2011-v3, and 2066 sockets. AMD AM2, AM2+, AM3, AM3+, FM1, FM2, and FM2+ sockets are also supported. Additionally, AMD AM4 sockets from 2019 and later are compatible with this cooler.
Widended Heatstack and Expanded Heatpipes
Wider by design than other Noctua coolers, the NH-D15’s fin-stack is extended and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area. This six-heatpipe dual-tower design also provides greater airflow efficiency in dual-fan mode.
High RAM Compatibility in Single Fan Mode
Thanks to its recessed lower fins, the NH-D15 provides 2.52″ of clearance for tall memory heatsinks in single-fan mode, making it compatible with most RAM modules on the market. In dual-fan mode, the NH-D15 should be used with standard height RAM up to 1.26″.
Dual NF-A15 140mm Fans
The NH-D15 features two NF-A15 140mm fans. Complying with Noctua’s AAO standard, these fans feature aerodynamic flow acceleration channels, intended for improved airflow.
PWM Support and Low-Noise Adapters
The NF-A15 fans supplied with the NH-D15 support PWM for automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200 rpm using the supplied low-noise adapters for even quieter operation.
SecuFirm2 Mounting System
Noctua’s SecuFirm2 mounting system supports Intel LGA 1200, 1150, 1151, 1155, 1156, square-ILM 2011 and 2011-v3, and 2066 sockets. Supported AMD sockets include AM2, AM2+, AM3, AM3+, FM1, FM2, and FM2+. AMD AM4 sockets from 2019 and later are also supported.
